HD Aluminum prints are crafted using the "Dry Sublimation" process in which the image is printed onto transfer paper with inks and sublimated onto the Chromaluxe® aluminum sheet with heat and pressure. This infuses the ink into the metal versus being printed on the metal. Prints done in this process are more scratch resistant and hold up well in moist environments. Prints

Printing is done using the widest color gamut possible with Genuine Epson archival inks.

Chromaluxe® aluminum is very easy to clean and maintain. Prints are light weight and fade resistant. Chromaluxe® has 3x better permanence than Kodak Silver Halid Prints resisting fading for 65+ years.

Acrylic prints are crafted utilizing the “Face Mounted” method. This method prints the image first onto high resolution metallic photo paper which is Face Mounted to the acrylic utilizing optically clear adhesives. The result is the sharpest and most vibrant acrylic prints available. This differs greatly from other printers/box store printers in which the image is printed directly on the acrylic.

High Resolution Moab Slickrock Metallic Photopaper and Epson archival inks are combined to provide an image that is exceptionally vibrant, luminous, iridescent and have the appearance of 3D.

Acrylic – only high-quality UV resistant cast acrylic is utilized versus extruded acrylic. This provides more rigidity and prevents yellowing over time.

Typical structure is ¼” front acrylic, photo paper, 1/8” pvc backer to reduce weight. These are then fused together for a final image that is nothing short of amazing.

Under proper lighting (halogen) the images appear to backlit and have that glowing effect. It’s striking and captivating.

Anti Glare options are available as well.

Aluminum mount – ¾” deep natural silver or black aluminum which makes the image appear to float off the wall.

Flush mount – Metal Prints Only – ¾” deep silver or black which gives the print added body and a more substantial profile and fits snug against the wall.

Wood mounts – Metal Prints Only - Natural Birch or Matte Black Brich that is ¾” deep which makes the image appear to float off the wall.

Mounting Posts – 4 stainless steel 5/8” mounting posts and pre-drilled holes at the corner.  Attached the posts to the wall, then attach the acrylic or metal print.

Float mount – Float mounts are attached to the back of the print and float off the print ½” when hung.  Float mounts are not available for sizes 24x36 or larger.  This option saves some costs.

Hanger – The wall mounts come with a cleat hanger, screws, and bubble level with an option to replace the cleat with a wire hanger if desired. Only for sizes 12”x12” and greater.